|
|
|
|
| Tools: Glass cleaner,application fluid, razor blade
or scissors, squeegee, tape measure, needle, masking tape and a
friend to help. |
Step 1) Clean glass. |
Step 2) Measure both sides and mark w/ tape. |
|
|
|
|
| Step 3) Spray soap and water on the glass, peel
and spray the vinyl from the back after removing the wax paper. |
Step 4) Flip the vinyl over and position the vinyl
over the glass and line it up w/ the tape markings. |
Step 5) After placing the vinyl spray the vinyl
visor. |
|
|
|
|
| Step 6) Squeegee the vinyl and work the air and
liquid out. |
Step 7) Trim the vinyl with a blade. |
Step 8) Clean and re squeegee if needed. |
 |
Application fluid cleans without leaving residues.
It then helps to "float" the vinyl until it is properly positioned.
Free w/ orders over $140.00 |
|
|
Plain
Windshield Covers
